The BETA Build of Firmware Version 15 for the RED is now available. Check out the lengthy list of changes below!

Significant changes since Build 14.

Support for simultaneous RED-EVF, RED-LCD and HD-SDI/HDMI outputs.
MONITOR / ACTIVE parameter replaced by MONITOR / PREVIEW parameter,
Shutter speed reporting in Degrees or 1/xx Sec format.
Improved Shutter speed / angle reporting in SYNCRO and RELATIVE modes
Shutter speed / angle outside requested value indicator.
False Color Focus indicator (red edge highlight over monochrome)
Increased frame rate (100+fps) for 2K recording modes.
Anamorphic (1.2:1) recording modes for 2K, 3K, 4K
Camera LOOK file export/import to SD Card.
Addition of root directory (.RDM) to digital media.
Streamlined media formatting algorithms.
Auto format of blank media
Rejection of unqualified media
Enhanced Black Shading routine.
Clip Name and starting Timecode in status display on playback.
Re-activation of +48V Phantom Power.
Improved RED-DRIVE data synchronization in playback
Use meter reports in hours rather than minutes.
Encryption of camera LOOK and LOG files.
Updated RED-EVF color calibration
Change of fan default mode to AUTO.
Change of Headphone level default to -6dB.
Fan quiet on camera power cycle
Removal of User Guides A B C D
Varispeed settings remembered across power cycle
Adjusted QuickTime file so audio displays as discreet channels
Adjusted GUI to display D.C instead of A.C with 12V power sources.
Fixed Force Reel locks up camera UI bug.
Fixed image separation when in timelapse record bug.
Note: Regarding re-activation of +48V Phantom Power. Use of +48VPhantom Power not recommended unless using the new RED XLR-to-mini-XLR cable adaptor (single cable with integrated adaptor). Use of XLR-to-mini-XLR adaptor and mini-XLR-to-mini-XLR cable (an adaptor and a cable) should NOT be used. If you need this new XLR-to-mini-XLR cable adaptor, please contact RED for a replacement.